DYNAMIC TEMPERATURE SUPPLIES

Application: Fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. 

Construction:
- Silicone rubber ring slit for easy mounting over wire. Will compress on the wire when the cover is fitted.

Application: Bending protection for thermocouples and wire being used with standard connectors. 

Construction:
- Rubber insert.

Application: The two flexible silicone rubber boots will cover the connector set snugly and prevent moisture, water and dirt entering the connector. 

Construction:
- Silicone cover with retention ring prevent disconnection due to vibration.
- Tapered entrance hole to ensure proper sealing on the most cable diameters

Application: Wire inserts will provide a very good strain relief without any protruding parts from the connector. 

Construction:
- Thermoplastic material with a round or oval hole to fit around a specific wire.

Application: Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire. 

Construction:
- Brass machined insert with 0,1 mm tolerance on the cable OD.

Application: 
Adapter can be fitted in the entrance hole of the connector to braze/crimp in mineral isolated cable.

Construction:
- Stainless steel adapter, AISI-303 / DIN-1.4305 The adapter fits in all standard connectors.

Application: 
In order to prevent accidental disconnection a locking clip can be used.

Construction:
- Stainless Steel clip.
- Can be placed without any tools

Application: 
Wire clampbracket will provide optimum strainrelief. Construction allows a large difference in maximum and minimum wire diameter. 

Construction:
- All Stainless steel incl. Stainless steel screws.

Application: 
L-Bracket can be fitted on the connector, the brass crimp-adapter is specially treated to crimp on mineral isolated cable.

Construction:

- Stainless steel L-Bracket with brass crimp-adapter, chrome plated.

Application: 
Can be used to mount the connector on mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened. 

Construction:
- Stainless Steel compression fitting brazed on stainless steel L-bracket.
- Stainless steel nut and brass ferrule

Application: 
Allows the use of two connectors to be fitted on duplex mineral cable or duplex wire. 

Construction:
- Stainless steel bracket with stainless steel screws.
- Is designed to be crimped or brazed on the transition piece with an outside diameter of 6 or 8 mm.

Application: 
Allows the use of two connectors to be fitted on a duplex wire. Construction provides optimum strainrelief and large difference in minimum and maximum diameter. 

Construction:
- All Stainless steel incl. Stainless steel screws.

Application: 
Allows the use of two connectors to be fitted on duplex mineral insulated cable or a tube type thermocouple. Can be used several times if not overtightened. 

Construction:
- Stainless Steel compression fitting brazed on stainless steel L-bracket.
- Stainless steel nut and brass ferrule

Application: 
Can be used to mount two ultra high temp connectors on mineral
insulated cable or a tube type thermocouple. Can be used several
times if not overtightened.

Construction:
Stainless steel compression fitting with a brass ferrule on stainless
steel bracket

Application: Fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. 

Construction:
- Silicone rubber ring slit for easy mounting over wire. Will compress on the wire when the cover is fitted.

Application: Bending protection for thermocouples and wire being used with mini-connectors. 

Construction:
- Rubber insert.

Application: The two flexible silicone rubber boots will cover the connector set snugly and prevent moisture, water and dirt entering the connector. 

Construction:
- Silicone cover with retention ring prevent disconnection due to vibration.
- Tapered entrance hole to ensure proper sealing on the most cable diameters

Application: Wire inserts will provide a very good strain relief without any protruding parts from the connector. 

Construction:
- Thermoplastic material with a round or oval hole to fit around a specific wire.

Application: Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire. 

Construction:
- Brass machined insert with 0,1 mm tolerance on the cable OD.

Application:
Adapter can be fitted in the entrance hole of the connector to
braze/crimp in mineral isolated cable.

Construction:
Stainless steel adapter, AISI-303 / DIN-1.4305
The adapter fits in all miniature connectors.

Application: 
Wire clampbracket will provide optimum strainrelief. Construction allows a large difference in maximum and minimum wire diameter. 

Construction:
- All Stainless steel incl. Stainless steel screws.

Application: Designed for soldering or crimping on mineral insulated cable or crimping on insulated wire. 

Construction:
- Stainless steel bracket and insert with 0,1 mm tolerance on the cable OD. 
- Can be used on 2-pin connectors CMP-xx, CMJ-xx, CMPE-xx, CMJE-xx, CMPH-x, CMJH-x